TFY Universal Car Headrest Mount, Fits 7-11 Inch Tablets - iPad, Samsung Galaxy Tab & Note, Adjustable Strap, Detachable, Portable, No Protruding Parts

These are great for the back of each headrest. Our kids can watch their shows for long rides and it is totally worth it. These are just a huge piece of Velcro, so it’s a super strong hold around the headrest, but it’s not Velcro, obviously, where the tablet actually sits. The iPad fits great in the holder with no worries of it falling out. The kids don’t complain about glare or anything. It’s level with their heads. They only have to look up maybe an inch or two. When sitting up front, you can’t feel them on the head rest at all. Super thin material where it has to be, and super strong where it has to be. We bought one several years back, and now that we needed a second one, we searched this particular brand and bought a second from this same brand, because we are so pleased with the first.

Works great. Easy to install (just wrap it around the headrest) and the brackets hold firm to the velcro and are easy to adjust. We use it for both an iPad and iPad mini and to switch between you just take off the top bracket and restick it. It's easy to just lift the top one up to take the iPad out quickly. Still fits even with a large Gumdrop bumper case. We used to have the plastic kind of headrest mount with adjustable arm installed, but I was uncomfortable with how far from the seat it stuck out, plus without the iPad in place the plastic prongs sat right around face level for the backseat passenger, which seemed a bit dangerous. The TFY mount sits flush agains the back of the headrest and doesn't really stick out at all. It's not very noticeable when not in use, and much easier to take off and store. We even packed it in luggage for vacation so we could use it on the plane (around the seat tray) and rental car.

I use the headrest mount in a 2012 GMC Acadia and mount a Dell Venue 8 Pro tablet. I bought it based on good reviews and I definitely like the mount. My son watches movies on the tablet when we travel, and it gets some use several times a week. The construction is good quality and it definitely seems like it will last a long time. The mount wraps around the headrest (which is quite large in our vehicle), and it fits well whether the headrest is large or small. The brackets on the top and bottom attach via Velcro, which I wouldn’t have thought would be very sturdy, but they actually stick very very well and take a lot of pressure to remove. You can easily move them closer to or further from each other to accommodate different sized tablets. I haven’t put a 10 inch tablet in there, but it definitely seems like that would work. Overall, we really like the mount and would definitely buy it again. Exactly what I expected.

Full Disclosure: I received a this mount from MyTradeWorld for free for the purposes of this review after making some suggestions for improvements on a previous version of their tablet mounting system. However, the opinions in this review are my own and were not influenced by MyTradeWorld in any way. With that out of the way, this is a great mount! Like most of MyTradeWorld's headrest mounts, the kit is comprised of two main components- a large elastic and velcro band that wraps around your headrest, and a tablet holder that attaches to the velcro on the headrest band. The headrest band is the same one that MyTradeWorld has been using in their headrest kits for quite a while now- it is simply a stretchy band that you wrap vertically around the head rest and secure back to itself using the velcro areas on each end. In addition, there is a fuzzy velcro patch in the middle, which is what you attach the tablet to. It's a simple design, but it does the job very well. Plus, it doesn't look bad with my wife's car's dark gray leather interior, and it blends in just about perfectly with my car's black fabric interior. Pro tip: when installing the band, make sure you wrap it around the headrest tightly before securing the velcro! If it is too loose, the weight of the tablet can cause the band to slip until your tablet is pointing at the floor instead of the back seat. On a side note, while it isn't difficult to install or uninstall the strap, if you use more than one car on a regular basis, I've found it can make life a little easier to pick up a second band. That way, you can leave one installed in each car, and just need to move the actual device holder from car to car, which is simply a matter of pealing the piece off the back of one headrest and slapping it on the other. (Extra bands: TFY Vehicle Headrest Velcro-Strap ) The tablet holder is the part that varies between the different kits. In this case, the holder is composed of two identical pieces- each is made of up a large rubber-coated metal piece shaped vaguely like a taco shell. One of the upper edges of this piece floats free, while the other is secured with a wide elastic band to a vinyl & velcro piece which actually attaches to the band. To use the mount, you just attach both of these pieces to the band (the bottom one opening up and the top one opening down). Then it's just a matter of resting your tablet in the bottom hook and then pulling the top one up over the top of the tablet to secure it in place. If necessary, it's a simple matter to reposition on or both of the hook pieces on the band to allow the whole system to grip larger or smaller devices. The best part is that the elastic which connects the hook pieces to the velcro which attaches them to the band is pretty stretchy, so the system can be used with devices that are similar in size without having to make adjustments. My family has a 2012 Nexus 7, 1 2013 Nexus 7 (which of course is a different size), and most recently a Samsung Galaxy Note 8.0. We positioned the hooks in such a way that they are a little loose on the smallest device and a little snug on the largest, and now we can use the mount on any of the three without having to make any adjustments at all! Another plus is that the hooks are designed in such a way that they can work equally well for tablets with or without a case. One of our tablets doesn't have a case, but the other 2 are both in TPU skin-style cases. So far, they all seem perfectly secure and stay exactly where we put them, and keeps my 3-year-old happily watching his shows in the back seat when we're on long road trips.

it can be attached very easily in any headrest. bought another ipad holder before and the plastic broke in a few days. also it was very difficult to install and didn’t fit in the 2nd row middle head rest since it was a bit narrow.. Also it was on a ball joint made of plastic but the ball joint area broke it pieces and money wasted. this one worked in all pf them and very sturdy and strong. i would highly recommend

Works great! No issues, strong velcro, easy size adjustments. Using it on a 11" iPad air.

Didn't believe that this would really work, but it's been great. Easy to install and it's very sturdy.

Easy to install and use

Product is excellent and convenient to use.